KEF BLADE TWO META FORSTED BLUE

For a lifetime of listening pleasure

Where space is at a premium KEF BLADE TWO offers all of the acoustic prowess and iconic design of KEF BLADE TWO on a slightly smaller scale.

KEF BLADE TWO. Same DNA. Same striking aesthetic. Same advanced driver technology and unique single apparent source configuration. And above all, the same open, phenomenally realistic sound.

?Single apparent source
Like listening to one voice rather than many, sound from a single source is inherently clearer. Not only are the acoustic centres of the HF and MF drivers in the Blade & Blade Two Uni-Q array coincident, but the four LF drivers, (225mm/9-in. for Blade, or 165mm/6.5-in. for Blade Two) are mounted symmetrically equidistant from it so that their acoustic centres occupy exactly the same point in space.

This single apparent source configuration is what makes the Blade & Blade Two so gratifyingly coherent across the frequency range, with noticeably more precise imaging than is possible from any conventional speaker.

What you hear sounds as if it?s being performed live right in front of you.

Discrete bass chambers
The twinned pairs of bass drivers are mounted in discrete chambers separated by an internal partition. By increasing the frequency of any internal standing waves to way beyond the crossover point, this reduces the need for damping material (which can otherwise impair bass quality). Nothing has been overlooked in the quest for the ultimate clarity, right across the frequency range.

Force cancelling
To avoid dissipating the energy of such potent bass drivers in exciting the cabinet (and thereby generating resonance, especially at high volume), the large kinetic forces involved are cancelled out by mounting the LF drivers rigidly together, back-to-back.

By minimising cabinet colouration, this highly effective configuration partly accounts for the Blade & Blade Two?s natural-sounding and engagingly musical performance.

Attention to detail
With speakers as ambitious as the Blade & Blade Two, short cuts are out of the question. Everything has to be as right as it can possibly be.

Terminals & terminal links
Two pairs of the finest audiophile quality WBT connectors allow bi-wiring or bi-amping to optimise the retrieval of low level detail in the music.

Low order crossovers
The simple low order crossovers specified for both Blade & Blade Two employ the best components available, carefully selected by a rigorous auditioning process so that every part of the signal path is fine-tuned for maximum clarity.

Hard wiring
The patented screw-in linking plugs are to full audiophile specification (as well as simplifying set-up by eliminating fiddly wiring links). All the crossover components are individually wired by hand rather than mounted on a conventional printed circuit board. As well as being more environment-friendly, this optimises both reliability and sound quality by assuring the cleanest possible signal transmission.

Model?

BLADE TWO

Design?

• Three-way bass reflex
• Single apparent source
• driver configuration

Drive Units????????

Uni-Q driver array:

• MF: 125mm (5in.) Li-Mg-Al/ LCP hybrid cone
• HF: 25mm (1in.) vented aluminium dome

Bass units:

LF: 4 x165mm (6.5in.) with force cancelling

Frequency range free field (-6dB)???????????

34Hz ? 45kHz

Frequency range typical in room bass response (-6dB)?

25Hz

Frequency Response (?3dB)??????

40Hz ? 35kHz

Crossover frequency?????

320Hz, 2.4kHz

Amplifier requirements??????????????

50 ? 400W

Sensitivity (2.83V/1m)?

90dB

Harmonic distortion 2nd & 3rd harmonics (90dB, 1m)???

• <0.5% 40Hz ? 100kHz
• <0.2% 200Hz ? 10kHz

Maximum output (peak sound pressure level at 1m with pink noise)????

116dB

Impedance????????

4 Ohms (3.2 Ohms min.)

Weight

35.3kg (77.8lbs)

Dimensions ? with plinth (H x W x D)????

• 1461 x 338 x 475mm
• 57.5 x 13.3 x 18.7 in.