Hot
F300 (Pair)
₹26,900.00
Packing a punch well beyond its diminutive size the versatile F300 can be used for two channel or multichannel applications. Pre-fitted to the rear panel of the F300 is a bracket allowing the speaker to be easily flush-mounted to a wall. This is a really handy feature where space is at an absolute premium, or for using the speaker as a rear effects speaker in home cinema set up.
System Type | 2 way, rear ported |
Recommended amplifier power (Watt RMS) | 20- 70 |
Continuous power handling (Watt RMS) | 35 |
Sensitivity (2.83 Volt @ 1m) | 87dB |
Nominal impedance | 8 Ohm |
Frequency response (-6dB typical in room) | 54Hz- 28kHz |
Drive unit complement | 1 x 125mm multi-fibre bass/ mid 1 x 25mm polyester dome tweeter |
Crossover frequency | 3.4kHz |
Crossover type | 2nd order low pass, 3rd order high pass |
Dimensions – HxWxD | 250 x 156 x 211mm (9.8 x 6.1 x 8.3”) |
Weight – Each | 3.7kg (8.2lb) |
Finishes | Walnut / Black Ash / Light Oak |
Brand | |
---|---|
Variant | |
Product Type |
FYNE AUDIO’S IsoFlareTM driver is a point source system whereby the bass / midrange driver shares a common centre with the high frequency unit. Providing outstanding stereo imaging, even off axis, energy is radiated isotropically with constant directivity, following the flare of the driver cone. Sound is produced as if emanating from a single point in space.