Elac Uni-Fi 2.0 UB52 (Pair)

₹82,900.00

Speaker type: 3-way, bass reflex
Tweeter: 1 x 1-inch soft dome, concentrically mounted Midrange: 1 x 4-inch aluminum cone
Woofer: 1 x 5.25-inch aluminum cone Crossover frequency:200 / 2,000 Hz

Enjoy balanced stereo sound from this pair of blackELAC Uni-Fi 2.0 UB52 3-Way Bookshelf Speakers. They feature a 3-way design with a 1″ soft-dome tweeter concentrically mounted to a 4″ aluminum cone midrange, and a 5.25″ aluminum cone woofer, plus a flared front-facing port. The speakers accept 40 to 140W of power from your amplifier and have a 46 Hz to 35 kHz frequency response.
3-Way Speaker Design
With separate tweeter, midrange, and bass drivers, the Uni-Fi 2.0 UB52 is designed to deliver clean bass without distorting vocals.
Concentric Driver
A wide-surround tweeter helps enhance its low- and high-frequency extension, allowing for enhanced blending with the midrange driver. The midrange driver features a large-diameter voice coil, aluminum cone profile, low-profile surround, and neodymium magnet assembly.
Single-Piece Woofer
The single-piece aluminum dished cone is used for its advanced stiffness. Combined with an oversized magnet, large diameter voice coil, and extended pole piece, the woofer is engineered for enhanced accuracy and bass dynamics.
3-Way Crossover
The crossover features a design with enhanced linearity and driver integration to provide a true 6-ohm nominal impedance for compatibility with virtually all A/V receivers.
Braced Design
The Uni-Fi 2.0 uses thick CARB2-rated MDF outer walls with specially located internal bracing to add stiffness and strength to the outer walls, reducing cabinet vibration that causes unwanted coloration.
Front-Firing Vent
Placing the flared vent on the front of the speaker allows for greater freedom of placement, even in restricted places like a cabinet or near a wall.
Key Features
- 40 to 140W Recommended Amplifier Power
- 3-Way Speaker Design
- 5.25″ Aluminum Cone Woofer
- 4″ Aluminum Cone Midrange
- 1″ Soft-Dome Concentric Tweeter
- Front-Facing Flared Port
- 46 Hz to 35 kHz Frequency Range