Hot
About the ELAC Debut 2.0 OW4.2
Audiomaxx brings you the Elac Debut 2.0 OWB4.2 – a 2-way bass-reflex on-wall speaker that can deliver up to 120 Watts of output. The compact proportions of the Debut OWB4.2 make installation on the side or rear walls a breeze. Bring huge dimensionality to your system with a speaker that makes itself heard but barely seen.
With a frequency response between 70Hz-35000Hz, the OW4.2 on-wall surround speaker incorporates a custom-engineered 4″ mid-bass driver and a 1″ cloth dome tweeter. Delivering a sensitivity of 87db @2.83v/1m, the compact OWB4.2 carries forward the legacy left behind by the award-winning original Debut series.
Housed in a thick MDF cabinet with a classy black ash vinyl finish it incorporates larger internal braces for greater stiffness and strength to reduce cabinet vibrations. Sporting a pragmatic design thought, the bass ports of the OWB4.2 are located at the bottom of the cabinet allowing placement against on walls without any compromise in sonic performance. You can use this on-wall speaker as part of a multichannel surround system by pairing it with other speakers from the Elac Debut 2.0 series.
Warranty – 3-year Manufacturer’s Warranty
Product Highlights:
- Slim design for use as wall-mounted side or rear surround speakers
- 1″ silk dome tweeter with wide-dispersion waveguide for smooth, accurate highs and extended high-frequency response
- 4″ aramid-fiber woofer with oversized magnet for punchy midrange
- Frequency response: 70-35,000 Hz
- Sensitivity: 87 dB
- Impedance: 6 ohms
- Recommended amplifier power: up to 80 watts
- Bass-reflex cabinet with bottom-firing port
- Custom multi-element crossover with high-grade components to ensure a smooth transition between drivers
- 5-way binding post speaker terminals
- Thick MDF cabinet walls with black ash vinyl finish
- 7-7/8″W x 12-7/8″H x 4-3/4″D
- Weight: 3.6 (each)
- Warranty: 3 years
What’s in the Box:
- Owner’s Manual
- 2 On-wall loudspeakers
- 2 Grilles
- 4 Brackets
- 8 Screws
- 4 Anchors
- Operating Instructions
Key Features:
- Affordable audiophile-grade on-wall speakers
- 2-way speaker design with 120W output
- Features 4″ woofer and 1″ cloth dome tweeter
- Delivers a wide frequency range of 70Hz-35000Hz
- Slim design for use as wall-mounted side or rear surround speakers
- Housed in an MDF cabinet with a classy black ash vinyl finish
- Bottom ported for easy wall-mounting with any quality loss
- High-quality 5-way metal binding posts for maximum signal integrity
Features:
Two-Way Driver Design:The Elac Debut 2.0 series DOW42 on-wall loudspeaker features a two-way driver design with a 1″ tweeter, one 4″ woofer, and a 2,500Hz crossover. Both the tweeter and woofer have been custom designed by Andrew Jones to deliver an exceptional audio experience that can’t be delivered with typical off-the-shelf parts
Cloth Dome Tweeter w/ Wave Guide:The 1″ silk soft-dome tweeter features a wide-roll surround that improves power handling and a waveguide that improves directivity control by eliminating cabinet diffraction inherent in traditional box enclosures. The 1″ silk soft-dome tweeter candle handle high frequencies up to 35,000 Hz.
Woven-Aramid Fiber Woofer:The on-wall speaker features a single 4″ woven aramid-fiber cone woofer with rubber surround, oversized magnet, and vented pole piece. The revised shape of the aramid cone offers even greater stiffness and damping; far superior to polypropylene or paper. The added strength allows more flexibility in design to achieve a smoother, extended low-frequency response.
Custom Crossover:A custom seven-element crossover (2,500Hz) with audio-grade components is implemented to ensure a smooth transition between the tweeter and woofer.
Bass Reflex MDF Cabinet:The Elac Debut 2.0 series DOW42 on-wall loudspeaker uses a bass reflex cabinet with two top-firing flared ports for greater efficiency and bigger bass response. The cabinet is made of MDF (Medium Density Fiberboard) to strengthen and stiffen the cabinet, helping minimize unwanted vibrations that can discolor music or movie content. The MDF outer walls of the cabinet are covered with a black ash wood-grain vinyl finish. A detachable cloth grille is included.
5-Way Binding Posts:The Elac Debut 2.0 series DOW42 on-wall loudspeaker is fitted with a set of 5-way binding-post terminals that will accept bare-wire (up to 10AWG), pin connectors, spade lugs, and banana plugs (single or dual).
Placement & Mounting Options:The Elac OW4.2 on-wall speakers are designed as either on-wall surround speakers, on-wall front channels speakers, or on-wall side channel speakers. Mounting brackets are included to hang the Elac OW 4.2 speakers on your wall (screws for mounting the brackets to the wall are not included). You can also choose to place the DOW42 speakers on a flat surface, like a stand or shelf.
Elac Debut 2.0 Series:The Elac Debut 2.0 series family of loudspeakers consists of two floorstanding loudspeakers (DF52/DF62), two bookshelf loudspeakers (DB52/DB62), two center-channel loudspeakers (DC52/DC62), a Dolby Atmos-enabled loudspeaker (DA42), and two powered subs (S10EQ/S12EQ).
